top of page

Bolt Defect Inspection
Measurement of defects in Bolt using Equipment B1. Equipment & Accessories DEEPSOUND B1 ※ Accessories Probe: 5L32-A32(Omniscan Probe)...
6 views
Building the installation environment
To install the program on my desktop and laptop, proceed with the following method. List of programs we need to install: .Net framework...
0 views
Encoder Information
Encoder Information: A function that informs you of the position when the connected device moves. <Encoder Information Display> Encoder...
2 views

Main Window
※ DSViewer: A program designed to analyze image data collected from equipment. The program is included in the folder when DSVision is...
4 views

Total Menu
Total Menu: A list where all functions are arranged. You can check the functions that are not placed on the Main Toolbar. File: You can...
3 views

Main Toolbar
Main Toolbar: A list composed of the most frequently used functions. The explanation will proceed from left to right. File: This...
5 views

Sub Toolbar
Sub Toolbar: This list is necessary for using measurement-related functions on the screen. Sub Toolbar: It can be activated by clicking...
1 view

Mini Toolbar
Mini Toolbar: This is used to check the status at the very bottom of the screen. The main display shows the filename of the loaded data,...
1 view

Shortcut Key Operation
The program has various shortcuts and functions. It is structured as follows. List Shortcuts Explanation Reference Bar Right Double-Click...
2 views

HDPE Material Demo TEST
This document details the measurements and inspection results for the thickness and central defects of HDPE material. Two tests were...
8 views

2 views

2 views

5 views

Detecting SUS Weld defects
<Burst Count 1 & 2>
4 views

Weld Defect Mesurement
※ Welding A Sample without paint <A Sample> Sample Material: MILD Steel Sample Thickness: 18.65mm There are internal defects at the...
4 views

Measurement TEST for square defects
※ Sample block information ※ PAUT configuration ( Sectorial mode ) <Inspection Image> ※ PAUT configuration ( Linear mode ) <Inspection...
1 view

Corrosion Sample TEST
Corrosion Sample TEST ※ Conduct a comparison TEST using Olympus equipment and corrosion inspection. ※ Sample & Setting information ※ Test...
3 views

Specimen part
Specimen & Weld can be configured by clicking the icon shown below. Specimen mainly includes lists for ultrasonic speed, thickness, and...
3 views

Weld Part
Weld Part - This function draws the shape of the weld on the scan screen. You can enter this menu by clicking Weld in the Specimen list...
5 views

Probe & Wedge Part
Instructions on how to configure the Probe & Wedge: Click the probe-shaped icon in the upper right corner to access the settings as shown...
4 views

Gate Part
Gate: Used for analyzing and measuring the pulse. The Gate function is useful for setting the location and area of defects and also for...
2 views
bottom of page