top of page
DSPAUT
PRODUCT OVERVIEW
A quick look at DEEPSOUND's complete portable PAUT package.
TFM / FMC Support
B1 equipment supports TFM/FMC function.
You can see that it is a good value for money equipment and also has excellent software performance.
*TFM/FMC need to be purchased separately
How to power on DEEPSOUND B1
This video shows you how to turn on your PC.
While watching the device's status LED, press and hold the right power button for 3 seconds.
Then, the LED lights up and power is supplied to the PC.
A Lightweight and Compact Product
The B1 equipment is portable and has high advantages when moving in a complex field.
It weighs less than 2kg even with the battery installed, and it has a 7" wide monitor to show a clean image.
Quick-Change Batteries
The DEEPSOUND B1 does not use a battery pack. Instead, it uses 18650 batteries which are easy to find on the market.
Carry fully charged 18650 cells to make replacing them a quick and effortless process and extend the operation time of the B1.
DIFFERENCE IN BEAM FOCUSING
Program shows visible differences in beam focusing of detected flaws.
The high-resolution images it generates allow users to clearly differentiate between even the smallest groups of adjacent defects.
With high-quality images paired with the option to inspect with different scan types (sectorial/linear), PAVision is a powerful and versatile tool that will be suitable for any task at hand.
UTILIZING CHANNEL GROUPS
Program supports customizable Channel Groups.
The program also includes TOFD, enabling users to create various configurations, including the PAUT + TOFD configuration.
THICKNESS MEASUREMENT
Program is capable of detecting differences in corrosion thickness.
These differences, which are distinguished by color, allow for intuitive evaluation, and the inspected data can be further examined by using DEEPSOUND's analysis program: DSViewer.
SPECIFICATIONS
General | |
---|---|
Dimensions(W x H x D) | 214 x 140 x 75mm(With Case) |
Weight (With Battery x 6) | 1.5kg ( With Battery ) / 1.2kg ( With out Battery )
|
Power Supply | 12V, 5A |
Batteries | Li-ion, Size ( 18.5 x 69mm ), 48g x 6 |
Operation time | Up to 4 hours |
Display | 7” Wide Monitor [ 1024 x 600 ] |
Storage | 32GB |
Connectivity | |
---|---|
USB Port | USB 2.0 x1 |
Probe Port | Minidock 160p type PA Connector x1 |
UT Port | Lemo 00 UT Connector x2 |
Encoder Port | 2-Axis Encoder input |
Environmental | |
---|---|
Operating temperature | 0 – 60℃ |
Storage Temperature Range | -20 – 80℃ |
PA/UT Configuration | |
---|---|
Effective Digitizing | 100MHz |
Max PRF | 30kHz |
Refresh Rate | 30Hz |
A-scan Height | 300% |
Phased-Array | |
---|---|
PAUT Channel Configurations | 16:64PR |
Scan type | Linear, Sectorial, Conventional, TOFD |
Focal Law | Unlimited |
Channel Group | Up to 4 |
Focusing mode | True-depth, Sound path |
Data Specifications | |
---|---|
Maximum Number of A-scan Data Point | Up to 16384 |
Rectification | RF, Full wave |
Filtering | Selection of low-pass, Band-pass, High-pass |
Video Filtering | Smoothing |
TFM/FMC Raw Data Export | Yes |
Pulse Specifications | |
---|---|
Voltage | 25V ~ 160V ( 5V Step ) |
Pulse Shape | Bipolar Pulse |
Pulse Width | 50nsec ~ 2,000nsec |
Receiver Specifications | |
---|---|
Gain Range | 0dB ~ 90dB |
Band Width | 0.5 ~ 20MHz |
Sample Resolution | 16bit
|
Dynamic Sample Focusing | Yes |
bottom of page