Portable
Product Overview
Check out DEEPSOUND's complete portable PAUT package
Probe port information
This video shows how to install the connector on a B3
Check the probe's mounting orientation.
How to Power On the DEEPSOUND B3
When you turn on the device, a green LED light will illuminate in the lower right corner.
This provides the advantage of being quick and easy to power on,
The power button LED lights up when booting is complete, making it easy to determine.
Light and Compact Product
The B3 device is portable, allowing for easy movement even in confined or complex field environments.
With a compact body and a 7-inch wide display, it offers both portability and clear visuals.
It is very light, weighing only 1.42 kg.
Quick Battery Change
The DEEPSOUND B1 battery pack is composed of 18650 cells.
The advantages of 18650 cells are that they are easily available on the market and can be easily installed and removed from the device.
Therefore, they can be easily replaced even during device operation.
Difference in Beam Focusing
Shows a noticeable difference in defect beam focusing.
The high-resolution images produced allow users to clearly distinguish even the smallest clusters of adjacent defects.
The program, which offers options for inspection with various scan types, provides high-quality images and serves as a versatile tool for all tasks.
Channel Group
The program supports customization channel groups.
This allows users to create various configurations, including PAUT + TOFD setups.
Thickness Measurement
The program can detect differences in corrosion thickness.
These differences, distinguished by colors, allow for intuitive evaluation, and the inspected data can be further reviewed using DEEPSOUND's analysis program, DSViewer.
PORTS
Front Panel
Rear Panel
Right Panel
TOP Panel
SPECIFICATIONS
General | |
|---|---|
Dimensions(W x H x D) | 174mm x 111.5mm x 61mm |
Weight | 0.9kg (With Battery x1 |
Power Supply | 12V, 5A |
Batteries | Li-ion, 7.2V/6600mAh/47.52Wh x 1ea |
Operation time | Up to 5 hours |
Display | 7” Wide Monitor [ 1024 x 600 ] |
Storage | 16GB |
Environmental | |
|---|---|
Operating temperature | 0 – 60℃ |
Storage Temperature Range | -20 – 80℃ |
Connectivity | |
|---|---|
USB Port | USB 3.0 x1 |
UT Port | Lemo 00 UT Connector x2 |
Encoder Port | 2-Axis Encoder input |
PA/UT Configuration | |
|---|---|
Max PRF | 3000Hz |
Refresh Rate | 30Hz |
A-scan Height | 300% |
Phased-Array | |
|---|---|
PAUT Channel Configurations | 16:64PR |
Scan type | Linear, Sectorial, Conventional, TOFD |
Focal Law | Unlimited |
Channel Group | Up to 4 |
Focusing mode | True-depth, Sound path |
Receiver Specifications | info |
|---|---|
Gain Range | 0dB ~ 90dB |
Band Width | 0.5 ~ 20MHz |
Sample Resolution | 16bit
|
Dynamic Sample Focusing | Yes |
Data Specifications | |
|---|---|
Image export | Yes |
Maximum Number of A-scan Data Point | Up to 16384 |
Rectification | RF, Full wave |
Filtering | Selection of low-pass, Band-pass, High-pass |
Pulse Specifications | |
|---|---|
Sample Resolution | 16bit |
Band width | 0.5~20MHz |
Gain Range | 0dB~90dB |
Voltage | 25V ~ 160V ( 5V Step ) |
Pulse Shape | Bipolar Pulse |
Pulse Width | 50ns ~ 2,000ns |
