Encoder Information:  A function that informs you of the position when the connected device moves. <Encoder Information Display> Encoder...

Weld Part -  This function draws the shape of the weld on the scan screen. You can enter this menu by clicking Weld in the Specimen list...

Instructions on how to configure the Probe & Wedge: Click the probe-shaped icon in the upper right corner to access the settings as shown...

Gate:  Used for analyzing and measuring the pulse. The Gate function is useful for setting the location and area of defects and also for...

Encoder (Scanner):  A menu for setting up the encoder to acquire image data. The configuration menu of the encoder varies by type....

Display: A function that affects the screen. <Display Display> Ref. Cursor:  An On/Off function for the Reference Cursor, indicating its...

Channel Add: A menu for setting up Channel Groups. This is a necessary function when adding a channel, as shown in the picture below....

Calibration: It consists of five types. ( Velocity / Wedge delay / Sensitivity / TCG / Encoder ) <Velocity Calibration Display> ※...

Wedge Delay:  A function used for distance calibration for the entire angle (vector) set in the Focal Law. ※ Based on the first reflected...

Sensitivity: A function used to consistently set the sensitivity of the signal. <Sensitivity Display> ※To utilize Sensitivity, you must...

TCG:  A calibration function similar to Sensitivity. The difference from Sensitivity is that it allows calibration across multiple...

Encoder Calibration: A function used to fix position data for accurate operation of the equipment. Since the Encoder (Scanner) produces...

Environment settings are activated when you click on the left icon as shown below. <Preferences Icon> A UI window like the one shown in...

To Start, Stop, or Pause the inspection, there are three buttons on the left icon. <Inspection Mode Button Icon> Start:  When clicked, it...

Screenshot:  A function used to capture the entire screen of the program. You can set the image and layout for defects and capture the...

AutoGain: Literally, a function that automatically sets the desired amplitude value. This function is applied based on the value entered...

Zoom & Zoom Reset:  A function that can be applied to the scan screen. When you click the icon at the bottom left, the color changes,...

Gain:  A function that can increase the amplitude of the signal. How to set:  When you click Gain, a window like the one below will...

Top Menu Information: A section where you can view various values such as the position of the pulse within the Gate range and the...

You can check the Pulse by clicking the icon shown below. The Pulse part is composed as follows. Config: Stands for Configuration and is...